 | |||||||
| BEAM |
LOADING:-It is a type of weight put on the beam which causes the beam to deflect or bend in shape.
 | |
| LOADING |
TYPES OF BEAMS:-There are five types of beams as under:-
1.Cantilever Beam:-A cantilever beam is one whose one end is fixed and the other end carries a point or concentrated load.
2. Simply Supported Beam:-A simply supported beam is one which carries two reaction forces at its two ends & a point load at its mid-point.
3.Overhanging Beam:-It
is a type of simply supported beam which overhangs from its supports.An
overhanging beam may overhang on one side only or on both sides of the
supports.
4. Rigidly Fixed Or Built-In-Beam:-It is a type of beam in which both ends are fixed and carries a point load at its centre.
5. Continuous Beam:-It is a type of overhanging beam which consists of a numerous reaction forces and point loads.
TYPES OF LOADINGS:-A beam may be subjected to either or in combination of the following types of loads:-
1.Concentrated Or Point Load:-It is a type of load which acts at the centre of the beam as shown below:-
2. Uniformly Distributed Load:-It is a type of load which is distributed uniformly over the entire length of the beam.
3. Uniformly Varying Load:-These
are the loads varying uniformly from zero to a particular value and
spread over a certain length of the beam.Such load is also called
triangular load.
